Methods and means how you can wipe off super-glue from plastic

Superglue comes to the rescue when you need to quickly and firmly connect two parts together.

When carrying out work, there is always a risk that the adhesive substance can get on the plastic surface, which does not need gluing.

If the stain is not removed immediately, it will dry out and be more difficult to deal with. Read about how and what to wipe off super-glue from plastic in the article.

How to remove "Moment" at home?

When choosing a glue remover, they are primarily guided by its composition. First you need to try to cope with the problem with non-aggressive substances.such as soapy water or alcohol. If the stain does not react, use solvents. It can be acetone, Anticlea, Dimexidum.

Soap solution

If glue has recently come into contact with the plastic surface, you can try to remove it with soapy water. For cooking, you will need laundry soap and hot water rubbed into shavings.

Mode of application:

1. Apply soapy water to the stain.
2. Leave to act for 30 minutes.
3. Wipe the dirty area with a rag.
4. Rinse with clean water.

If the glue cannot be completely removed the first time, the procedure is repeated. This method is not suitable for dealing with old spots that are a day or more old.

Laundry soap can be replaced with toilet soap, but its effectiveness is several times lower.

How to clean dried stains with rubbing alcohol?

Alcohol has the ability to break down glue molecules without harming the structure and color of the plastic. Apply it as follows:

• apply alcohol to a cotton pad;
• they treat the stain with it, wiping it several times;
• leave the disk in the form of a compress, if the glue layer is thick, start cleaning after 30 minutes;
• rub the sticky mass until it completely dissolves;
• rinse the treated area with water.

Wiper

You can cope with the glue stain using a household glass and mirror cleaner. These products include surfactants and alcohols (most often isopropyl and ammonia).Together, these components have good detergency.

Mode of application:

1. Spray the solution onto the contaminated area.
2. Leave to act for 15 minutes. During this time, care must be taken to ensure that the liquid does not evaporate and the stain remains moist. If necessary, soak the cloth with the cleaner and apply it on top.
3. The softened glue is removed with a paper towel until it dries completely.

From the first time it is possible to cope only with fresh stains. If they are old, you will need to repeat the procedure at least 2 times.

How to remove contamination with Dimexidum?

One of the best solvents for Moment glue is the anti-inflammatory drug Dimexide. You can buy the concentrate at any pharmacy.

Mode of application:

• soak a cotton pad or cloth with the composition;
• apply it to the plastic surface and leave for 5 minutes, if the stain is fresh, then you do not need to apply the lotion;
• remove the dissolved glue with a paper towel;
• wipe the treated area with a damp cloth.

If there are already other damages on the plastic surface, then it is better to refuse to use Dimexide so as not to aggravate the situation.

Dimexide can damage painted panels, causing light spots on them.... Therefore, you need to test it in an inconspicuous area.

Acetone

With the help of acetone, you can quickly remove Superglue from plastic, but you need to act carefully and quickly so as not to damage the surface.

Mode of application:

1. Apply the composition to a cotton pad.
2. Wipe the stain with it several times until it disappears completely.
3. Treat the surface with a clean, damp cloth.

Do not use acetone to clean lacquered plastic surfaces. It will damage the glossy layer and ruin the product. If in doubt, test the solvent on an inconspicuous area.

A less aggressive composition is nail polish remover... It can also dissolve superglue, but without the risk of damaging the plastic itself. Work with acetone with gloves.

Anticleus

When using anti-glue "Moment", "Force" or "Contact", you need to remember that all these compounds can lead to damage to the product. There are no universal recommendations, it all depends on the type of plastic.

Instructions for use:

• unscrew the cap;
• squeeze the cleaner onto the glue spots;
• leave to act for 10 minutes;
• remove the dissolved composition with a napkin, rinse with water and dry.

If it was not possible to clean the glue the first time, the procedure is repeated again, increasing the exposure time. While the gel is on the plastic, you need to monitor its reaction. In case of any changes, the composition is immediately removed.

Boiling water

If glue has recently come into contact with the surface, you can try to remove it with hot water. The higher its temperature, the better the effect.

Mode of application:

1. Heat water to a boil and pour it into a basin.
2. Immerse a plastic object in a container, leave it to soak for 15 minutes. Remove softened glue.
3. If the item cannot be soaked, it is placed under running hot water.
4. Another option is to constantly soak a rag in boiling water and apply it to the stain until it softens. After that, it can be rolled with any hard object, for example, the back of a knife.

This method will not help with old stains.

Petrol

You can get rid of glue stains with gasoline. There is no need to look for aviation fuel. Gasoline is suitable for refueling lighters.

Apply it as follows:

• moisten a rag or cotton pad with gasoline;
• rub the surface until the spot disappears completely;
• wipe the plastic with a paper towel and rinse with warm water.

What can not be deleted?

There are several prohibitions that must not be violated when trying to remove Superglue from plastic:

1. Do not use a solvent without making sure it will not harm the product.
2. Do not peel off the adhesive with sharp objects such as a knife or blade.
3. Do not use abrasive compounds. They will lead to scratches and cracks on the plastic surface.
4. It is forbidden to use heating devices to soften the adhesive base. This applies to any sources of open fire, blowtorch, iron, construction hair dryer.
5. Do not use sandpaper to remove the glue.

Advice

To quickly and effectively remove Superglue from plastic, you need to adhere to the following recommendations:

1. You need to start cleaning immediately. Even if the stains are invisible, they will turn yellow over time and will be more difficult to remove.
2. Apply any solvent to the spot aimingly, trying not to get on a clean surface.
3. When working with aggressive compounds, you need to take care of your own safety by protecting your hands with gloves. The room in which the glue removal process takes place must be well ventilated.
4. When working with solvents, use a light cloth folded in several layers of gauze or cotton pads. The pigment will be washed out from the dyed material and can be absorbed into the plastic.

You can find out how to remove glue from plastic here.

Conclusion

You can remove superglue from plastic with hot water, alcohol, or soapy water. These formulations will not harm the product.

If it was not possible to cope with their help, use solvents:

• acetone,
• Dimexide,
• Anticlea.

They dissolve glue quickly and effectively, but they must be used strictly according to the instructions.