Tips from experienced craftsmen on how to get and change heating elements for a Samsung washing machine

Samsung automatic washing machines provide high-quality processing of clothes during a full wash cycle. Prolonged operation of the device may cause malfunctions and wear of individual units.

One of the problems is the failure of the heating element. You can solve the issue of replacing the heating element of the Samsung washing machine yourself or by contacting the master.

How to remove it, how much it costs, how to change the heating element, we will tell in the article.

Element assignment

The tubular heating element of the washing machine is designed to heat water. Heating element is a metal tube filled with a heat-conducting electrical insulator.

A conductive thread runs along its center, providing the transfer of the required specific power and heating the water.

Its ends are soldered to the contacts to which voltage is applied. when the washing machine is running.

The activation of the heating element is triggered by a signal coming from the control module. At the same time, the element heats up, and gives off heat to water, heating it to the required temperature.

In addition to washing machines, heating elements used in:

• boilers,
• electric kettles,
• dishwashers,
• heating boilers, etc.

When does it require repair?

In the process of washing, in most modes, water heating is required. If the heating element is damaged, then the water does not heat up. The Samsung washing machine reports a malfunction using an error code that appears on the display.

This could be:

• HC2,
• HC1,
• NS,
• E6,
• E5,
• HE2,
• HE1,
• H2,
• H1.

Cars that do not have a display on the case signal a failure in the following way:

• blinking of all indicators of wash modes;
• the two central temperature indicators are on.

Or in this version:

• blinking of all indicators of wash modes;
• the second from the top and the bottom temperature light is on.

If the machine issued an error code and does not heat up, you need to make sure that the problem is in the heating element.

To do this, you should:

1. Check if the machine is correctly connected to the mains. If possible, remove extension cords and tees to ensure direct plug connections.
2. Check if the failure is an accidental malfunction. To do this, turn off the machine, then turn on and restart work.

If, after all the checks, the heating element still does not heat, you will have to do the repair. This requires a tool and a new part.

The lack of heating does not necessarily indicate a problem with the heating element, also, the possibility of a failure in the control module and breakdown of the temperature sensor cannot be ruled out.

It is possible to make sure that the device is inoperative only by measuring the resistance. This can be done with a multimeter. Before this test, it is impossible to say for sure that the problem is in the heating element. Breakdown of heating elements is one of the most common malfunctions.

Where is he located?

In order to gain access to the heating element, it is necessary to partially disassemble the washing machine. This requires a set of screwdrivers. In most models of Samsung machines, the heating element is located at the bottom with access from the front side.

Before proceeding with the repair, preparatory work must be done:

1. Drain the water if there is any in the tank.
2. Disconnect the washing machine from the mains by pulling out the plug.
3. Shut off the water supply to the machine.
4. Pull out the dish for adding detergent.
5. Extend the machine so that you can easily access it from all sides.
6. Unscrew the screws from the rear panel that hold the top panel.
7. Slide the top cover and remove it.
8. In the upper part of the machine, from the front and from the ends, find and unscrew the screws that hold the panel with indicators. Since it is connected to the machine not only by external fasteners, but also by wires located on the inside, you should act very carefully.
9. The unscrewed panel is placed on top of the machine without breaking the contacts.
10. Find all the screws holding the front panel and unscrew them.
11. The front panel is removed. In the area of ​​the hatch lock, this panel is wired to the machine. The wires must be carefully disconnected, and the panel with the hatch door must be removed to the side.

How to pull out and replace with your own hands?

Having gained access to the heating element, you can begin the process of dismantling and subsequent replacement of the part. The work must be carried out in stages:

1. Disconnect the heating element supply wires.
2. Using a multimeter, determine the performance of this element. To do this, one probe is connected to one contact, and the other to the second. If the indicator is "1" or "0", then the heating element is inoperative. Depending on the model, the reading should be around 30 ohms.
3. If the "ringing" gave a positive result, then there is no need to replace the heating element - it is in working order. Otherwise, you need to continue dismantling.
4. Unscrew the central nut that holds the heating element. Without removing it, it is slightly recessed inside with a hairpin, squeezing the gasket. This can be done by lightly hitting the protruding part with a small hammer.
5. Swinging, pull out the heating element. For convenience, you can gently pry it off with the end of a flat screwdriver. Do not use force by pulling strongly on the contacts, as they may break off, making it difficult to remove the entire part.
6. The new heating element is installed in place of the previous one, inserting it all the way.
7. After the heating element has firmly sat down, it is necessary to tighten the central nut, fixing the heating element.
8. Connect the wires.
9. Assemble the washing machine in reverse order.

After completing the assembly, you need to do a test run of the work by selecting a program with water heating.

Video about replacing heating elements on a Samsung washing machine:

Price and place of purchase

A new heating element, instead of a spoiled one, can be bought in a store or ordered with delivery through an online store. As a rule, there are no problems with the order.

But it is necessary to approach the issue seriously, since there are various models on sale Heating elements. They differ in power and modification.

For Samsung washing machines heating elements often come with a power:

• 1.9 kW,
• 1.85 kW.

The cost of one of the popular models of heating elements for the Samsung washing machine, with a built-in heat sensor, TPd 180-SG-1900, will be from 500 rubles.

The heating element is not the most expensive part. There are many varieties of heating elements, but it is advisable to stop the choice on a model that is similar to the one being replaced. You should not buy a used heating element, even if it "rings" - there is no guarantee that it will serve for a long time.

Causes of breakdown and prevention methods

One of the main reasons affecting the life of a heating element is water qualityentering the washing machine.

With hard tap water, lime deposits begin to be deposited on the heating element. Plus, debris sticks to it, which reduces heat transfer and makes the device work more and more intensively.

As a result, overheating occurs, which accompanies almost any wash cycle with heating water. A faulty heating element is not repaired, it can only be replaced with a new one.

In order to extend the life of the heating element, it is recommended to clean the washing machine every few months. One of the available options is with citric acid... It is simply poured into the compartment for the detergent powder and one of the modes is started at high temperature.

Preventive cleaning will help to clean not only the heating, but also other elements of the washing machine. You can find out how to descale a washing machine using citric acid here.

Master's challenge: how to find how much the work costs?

If you are unsure of your ability to dismantle and install the heating element, as well as the lack of the necessary skills and tools, you should contact a company that provides repair services for Samsung washing appliances. You can search for such a company on the Internet.

In Moscow, the cost of the work of the master, excluding the price of the heating element itself, is from 1,800 rubles (by region, the amount may be less). If along the way there are other problems with the machine that require attention, the price will be higher. After completing the work, the master issues a guarantee.

Contacting private craftsmen cannot give confidence in the quality of the work being done. In the event of an unsatisfactory result, it will not even be possible to file a claim. In addition, there is a chance to run into scammers and irresponsible performers.

All the most important and useful about the repair of Samsung washing machines - in this section of the site.

Conclusion

Replacing the heating element of a Samsung washing machine is not too difficult, but laborious, requiring a partial disassembly of the device. If you have basic knowledge of equipment repair, and having the appropriate tool, it will not be difficult to do this. If there are no such skills, then it is better to contact a repair company washing machines, and place a master call at home.